3D printed kits
Ready-made printed parts kits, printed to order in our workshop.
LeRobot humanoid partsRobot arm kitsPrinter upgradesDrone frames & partsRobot car chassisEnclosuresDesk & organisersCosplay & propsSTEM learning kits
Filters
1–24 of 25 results
4WD robot car chassisRigid printed chassis for 4× N20 or TT motors with sensor mounts.Printed parts: 9Filament: ≈ 260 gLead time: 3–5 business daysfrom ₹1,509
LeRobot humanoid — full printed parts kitAll 76 printed parts for the open-source LeRobot humanoid biped (~3.8 kg of filament), printed to the published guide.Printed parts: 76Filament: ≈ 3817 gLargest part: Femur half 1/2 · 118.3 × 60 × 390.6 mmPrint profile: 4 walls · 30–35% gyroid · 100% for hip X / hip Zfrom ₹19,349Planetary gearbox learning kitSee-through 5:1 planetary gearbox — learn gear ratios by hand.Printed parts: 10Filament: ≈ 140 gLead time: 3–5 business daysfrom ₹839
Raspberry Pi 5 vented caseSnap-fit case with active-cooler clearance and GPIO slot.Printed parts: 2Filament: ≈ 70 gLead time: 3–5 business daysfrom ₹449
SO-101 robot arm printed parts (follower + leader)All printed parts for an open-source SO-101 teleoperation pair — add STS3215 servos and go.Printed parts: 26Filament: ≈ 620 gMaterial: PLA+ (PETG optional)Arms: 1 follower + 1 leaderfrom ₹3,539
2WD differential-drive chassisCompact two-wheel + caster chassis for line followers.Printed parts: 5Filament: ≈ 120 gLead time: 3–5 business daysfrom ₹729
5" FPV accessory setCamera mount, antenna holders, arm guards and action-cam mount.Printed parts: 8Filament: ≈ 55 gLead time: 3–5 business days₹399
Arduino UNO enclosureTwo-part enclosure with USB-C and barrel-jack cut-outs.Printed parts: 2Filament: ≈ 60 gLead time: 3–5 business daysfrom ₹389
Desk cable organiser setClips, under-desk tray brackets and a charging-cable dock.Printed parts: 12Filament: ≈ 150 gLead time: 3–5 business daysfrom ₹889
Dual part-cooling duct setHigh-flow 5015 blower ducts for faster PLA cooling.Printed parts: 4Filament: ≈ 45 gLead time: 3–5 business days₹349
Filament dry-box spool roller kitBearing rollers that turn any airtight box into a feeding dry box.Printed parts: 6Filament: ≈ 120 gLead time: 3–5 business daysfrom ₹729
Gear train & mechanisms classroom kitSpur, bevel, worm and rack-and-pinion demonstrators on a pegboard.Printed parts: 24Filament: ≈ 320 gLead time: 3–5 business daysfrom ₹1,839
Headphone standStable, weighted-base headphone stand with cable hook.Printed parts: 2Filament: ≈ 180 gLead time: 3–5 business daysfrom ₹1,159
LeRobot humanoid — ankle mechanism printed set16 printed parts (90 g) — Ankle actuation cranks, push rods and bearing spacers.Printed parts: 16Filament: ≈ 90 gInfill: 30%Lead time: 5–7 business daysfrom ₹539
LeRobot humanoid — ankle printed set10 printed parts (16 g) — Universal-joint core, spacers and caps.Printed parts: 10Filament: ≈ 16 gInfill: 30%Lead time: 5–7 business daysfrom ₹119
LeRobot humanoid — foot printed set12 printed parts (150 g) — Foot plates, caps and bearing spacers for both feet.Printed parts: 12Filament: ≈ 150 gInfill: 30%Lead time: 5–7 business daysfrom ₹859
LeRobot humanoid — hip x (roll) printed set2 printed parts (830 g) — Hip roll brackets for both legs. Printed at 100% infill for stiffness.Printed parts: 2Filament: ≈ 830 gInfill: 100%Lead time: 5–7 business daysfrom ₹4,509
LeRobot humanoid — hip z (yaw) printed set4 printed parts (650 g) — Hip yaw housings for both legs. Printed at 100% infill.Printed parts: 4Filament: ≈ 650 gInfill: 100%Lead time: 5–7 business daysfrom ₹3,579
LeRobot humanoid — knee mechanism printed set6 printed parts (240 g) — Knee actuation cranks and linkage rods for both legs.Printed parts: 6Filament: ≈ 240 gInfill: 30%Lead time: 5–7 business daysfrom ₹1,319
LeRobot humanoid — shin printed set12 printed parts (240 g) — Tibia halves, spacers and caps for both legs.Printed parts: 12Filament: ≈ 240 gInfill: 30%Lead time: 5–7 business daysfrom ₹1,329- LeRobot humanoid — single spare partsAny of the 76 individual printed parts, left or right — replace exactly what broke.Material: PLA+ · BlackLead time: 3–5 business daysfrom ₹49
LeRobot humanoid — thigh printed set6 printed parts (780 g) — Femur halves and femur caps for both legs — the largest parts of the robot.Printed parts: 6Filament: ≈ 780 gInfill: 30%Lead time: 5–7 business daysfrom ₹4,219
LeRobot humanoid — torso printed set8 printed parts (820 g) — Pelvis/torso shell, upper torso halves, CAN-FD and IMU holders.Printed parts: 8Filament: ≈ 820 gInfill: 30%Lead time: 5–7 business daysfrom ₹4,459Sci-fi helmet kit (unpainted)Wearable adult-size helmet printed in sections, ready for sanding and paint.Printed parts: 8Filament: ≈ 1100 gLead time: 3–5 business daysfrom ₹6,259