Motors & drivers
Steppers, servos, DC and BLDC motors with drivers.
Filters
1–24 of 29 results
GenericNEMA 17 stepper motor1.8° bipolar stepper for printers, CNC and camera sliders.Step angle: 1.8°Rated current: 1.5–2.0 AShaft: 5 mm D-cutfrom ₹655
FeetechSTS3215 serial bus servoSmart servo with magnetic encoder — the actuator used in SO-100/SO-101 arms.Feedback: Position, speed, load, voltage, temperatureBus: Half-duplex TTL, 1 Mbpsfrom ₹2,447
Generic2212 920 KV brushless motorOutrunner BLDC for 450-class multirotors and fixed-wing.₹794
Tauren28 mm planetary gear motor with encoder (12 V)High-torque 12 V gear motor with quadrature encoder for rovers and arms.Voltage: 12 VDiameter: 28 mmEncoder: Quadraturefrom ₹1,869GenericA4988 stepper driverMicrostepping driver for NEMA 17 steppers.Current: Up to ≈2 A with coolingMicrostepping: 1/16₹66
AdafruitAdafruit DRV8871 brushed DC motor driverSingle H-bridge for one DC motor up to 3.6 A peak and 45 V, with current limiting.Motor voltage: 6.5–45 VCurrent: 3.6 A peak₹926
AdafruitAdafruit Motor Shield V2 for ArduinoDrives four DC motors or two steppers plus two servos from an UNO, using only the I2C pins.Motors: 4 DC or 2 stepper + 2 servoCurrent: 1.2 A per channelInterface: I2C₹2,463
GenericBTS7960 43 A H-bridge motor driverHigh-current single H-bridge for big DC motors.Current: 43 A peakMotor supply: 6–27 V₹362
CytronCytron MDD10A 10 A dual motor driverRugged 10 A per channel driver for mid-size robots.Channels: 2Current: 10 A continuous, 30 A peakMotor supply: 5–30 V₹3,112
AdafruitDC hobby motor, 130 size (Adafruit)Small 6 V DC motor for fans, spinners and school projects.Voltage: 4.5–9 VSpeed: ~9100 RPM at 6 V₹241
GenericDRV8825 stepper driver with heat sinkHigher-voltage microstepping driver for NEMA 17 steppers.Current: Up to ≈2.2 A with coolingMicrostepping: 1/32₹102
GenericDRV8833 dual DC motor driverCompact 1.5 A dual H-bridge for small DC motors and robot cars.₹104
DSServoDS3218 20 kg digital servoHigh-torque digital servo for robot arms and steering.Torque: ≈20 kg·cmRotation: 180°Gears: Metal₹2,310
AdafruitFS90R continuous-rotation micro servoMicro servo that spins continuously, with speed and direction set by the servo signal.Voltage: 4.8–6 VSpeed: ~130 RPM₹926
KitronikKitronik motor driver board for Raspberry Pi PicoPlug a Pico in and drive two DC motors, with spare GPIO broken out.Motors: 2 DC, 1.5 ASupply: 3–10.8 V₹1,452GenericL298N dual motor driver moduleClassic 2 A dual H-bridge for DC motors and small steppers.Channels: 2Current: 2 A per channelMotor supply: 5–35 V₹143
TowerProMG90S metal-gear micro servo9 g servo with metal gears for small arms and pan-tilt heads.Weight: ≈13 gTorque: ≈2 kg·cmRotation: 180°₹215
GenericMG996R metal-gear servoHigh-torque standard servo with metal gears (~11 kg·cm).₹285
GenericN20 metal gear motor with encoderMicro gear motor with a magnetic Hall encoder for closed-loop control.Encoder: Magnetic Hall, 2 channelsShaft: 3 mm Dfrom ₹569
GenericNEMA 23 stepper motorBigger stepper for CNC routers and heavy linear axes.Frame: 57 mm (NEMA 23)Step angle: 1.8°from ₹1,876
GenericPCA9685 16-channel servo driverRun 16 servos from two I²C pins.Channels: 16Interface: I²CResolution: 12-bit₹381
GenericSG90 micro servo9 g plastic-gear micro servo for light-duty projects.₹201
AdafruitSmall 5 V geared stepper motor (Adafruit)Unipolar geared stepper for slow, precise movement in small mechanisms.Voltage: 5 VSteps: 513 per output revolution₹612
STMicroelectronicsST B-G431B-ESC1 FOC motor driver (CAN)Small field-oriented-control driver for one BLDC motor, with CAN: one per robot joint.MCU: STM32G431Interface: CAN, UART, SWD₹4,834